13-42 0190
- Commonly used on air braked trailers to deploy lift axles with air suspension when trailer is loaded.
- Prevents the overloading of the trailer’s fixed down axles if operator neglects to lower the lift axle(s)
- The system monitors the load by sensing the pressure in the trailer’s air suspension.
- Lift axle(s) deployment range of trigger pressure from 25 to 80 psi
- Dimensions: Height 3.00” – Width 1.25” – Depth 10.08” – Approximate Weight: 2.97 lbs. (See Weight Chart)
- LSAS Flyer TIM0202-02C lsas flyer 0514
- LSAS Installation Manual TIU0425-03 LSAS Installation Manual
- LSAS Troubleshooting Guide TIU0617-03 LSAS Trouble Shooting
- Air Piping Diagrams – See Technical / Air Piping Diagrams, multiple diagrams are applicable. TIR0424-03 LSAS Overview Diagram
NOTE: 138999 Test Gauge Shown Above.
The following are drawings of electrical cables mentioned in the LSAS Installation Manual associated with the 138000 series valve family:
Power Cable, LSAS 12″ 138PC 12 Rev B
Power Extension Cable, LSAS 90″ 138PEC 90 Rev B
Power Extension Cable, LSAS 120″ 138PEC 120 Rev B
Power Extension Cable, LSAS 180″ 138PEC 180 Rev B
Power Extension Cable, LSAS 240″ 138PEC 240 Rev B
Power Extension Cable, LSAS 360″ 138PEC 360 Rev B
Switch Lead, LSAS, 12″ 138PS 12
Staus Lamp Lead, LSAS, 24″ 138SL 24 Rev B
Staus Lamp Lead, LSAS, 72″ 138SL 72 Rev B
Staus Lamp Lead, LSAS, 120″ 138SL 120 Rev B
Staus Lamp Lead, LSAS, 180″ 138SL 180 Rev B
Staus Lamp Lead, LSAS, 240″ 138SL 240 Rev B
Status Switch Lead, LSAS, 8″ 138SS 08 Rev A
*NOTE: 138001 Labels & Rubber Dust Cap Kit.